Table of Contents

1. General Configuration Information

Etrel Inch Duo charging station is configured using the web interface which can be accessed through the charging station IP. Additional settings can be adjusted using OCPP messages using the backend system.

Configurations cannot be made using the touch screen LCD as it is only used to show information what is happening with the charging station and offers to user basic controls of the charging session.

Sign In

Web interface can be accessed by connecting to the charging station IP. For the connection, the username (email) and password are needed.

Depending on the charging station supplier’s decision, the username and password are written on the sticker inside the side maintenance doors.

The type of access rights this username will have, is also decided by the supplier. It is possible to have admin rights or rights of an ordinary operator, which cannot change the configuration of charging station.

Open

At the first sign in, when the configuration of charging station was not performed yet, the configuration module will be shown.

Open

For any subsequent sign in, the main dashboard window will be displayed where it is possible to see current power, cluster power if the charging station is part of the cluster, building power load, if the Load Guard unit is also installed, charging station availability and information about the last session.

Last session status will be shown on the right side of the screen. If anything went wrong during the session, additional information can be acquired in the Diagnostics menu, accessed using the main menu (icon with three lines in the top left corner).

Change the Language

The language of the web interface can be changed to one of the languages supported by the web interface, by pressing the main menu icon and selecting the desired language.

Supported languages are set by admin user in the configuration menu.