Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Limitations with INCH

Currently we only support upgrading INCH chargers to 4.x with serial greater than 19420xxx.

You can also check if your station is eligible for new firmware with checking CC Hardware version.

To check version go to Menu → Diagnostics → CC hardware version.

Not compatible versions:

  • 0.93

  • 0.94

  • 0.95

Compatible versions:

  • 1.02

  • 1.2

  • 1.3

  • 1.4

Before upgrading

Make backups of data and settings. For data go to Menu → Diagnostics → Backup Data, for configuration click Backup Configuration. Data (Users, sessions,…) is lost after upgrade, and config can be restored from backup.

...

Upgrade to version 4.x requires multiple steps. Every step is done in same manner. See section https://etrelchargingsolutions.atlassian.net/wiki/spaces/Home/pages/3003678750/Upgrade+INCH+to+4.x#How-to-upgrade-INCH.Before that make sure your station is on version 1.13.9. Check first section of this page how to upgrade it to 1.13.9

It is important that you are following this guide precisely. Don’t skip any step.

First step

Download  Install_1.13.11_Etrel.zip and go to web interface of the station and apply this upgrade. Do not open .zip file

This step takes quite some time, atleast 15 minutes, on some stations a lot more. After a while, station should reboot by itself and you can check under Diagnostics menu if version 1.13.11 was installed. If not, delete your browser cache and refresh page to confirm that update was in fact installed.

Second step

Download Install_1.13.12_Etrel.zip and go to web interface of the station and apply this upgrade. Do not open .zip file

This step takes quite some time, atleast 45 minutes, on some stations a lot more. After a while, station should reboot by itself and you can check under Diagnostics menu if version 3.900.x or 4.0 was installed. If not, delete your browser cache and refresh page to confirm that update was in fact installed.

Third step

With every update from now on you must verify that you are using same OS Version, for every firmware update. Eg. App-4.0.2 can be installed only on OS 4.0.

...

First download system-4.0.itb and upgrade station with this update. After reboot, verify under Diagnostics that your OS version says 4.0

...

Fourth step

Upgrade station to latest app version, download app-4.0.23.itb and apply the update in Diagnostics

After reboot, station should be on OS version 4.0, and Software version 4.0.23

...