Software version: 1.10.0, Language update ========================================= Date: 15.4.2019 Package name: 1.10.0_3 Two languages got updated: Croatian and Hungarian. Software version: 1.10.0, Driver update ======================================= Date: 18.3.2019 Package name: 1.10.0_2 ### Drivers Afe.dll was updated to 1.13. This fixes random RegisterEvents failure. Software version: 1.10.0 ======================== Date: 15.3.2019 Minimum version required for installation: 1.5.0 ### Charger Operations - Operations settings version changed to 7 -- AuthorizationSettings: added setting SupportContact. Support contact is displayed on LCD help screens. -- CentralSystemCommunicationSettings: added setting VendorMessages (array). This enables some customization at sending specific DataTransfer messages. Contact Etrel if you require such customization. -- CentralSystemCommunicationSettings: added setting to the Client: AuthorizationKey. This enables security through OCPP JSON protocol. -- DalSettings: added setting MaxPowerSamples. -- EvsesSettings: removed setting EnforceMaxCurrentLimit, added SWOvercurrentProtectionEnabled and Overcurrent (array of settings). You can now define SW overcurrent protection limits. This protection would stop session before fuse would trip. But SW protection is not protecting against short circuits. -- TimeSettings: added setting TimeServers. Defines NTP servers against which charger can synchronize time if not connected to the central system. - OCPP 1.6 SetChargingProfile: if ChargingRateUnit = W, current is now recalculated periodically throughout charging (using actual measured voltage). - Added support for OCPP 1.6 CancelReservation and ReserveNow. - Added SSL support for OCPP 1.6 SOAP: Charger can communicate with center over HTTPS and it can be configured to host its OCPP endpoint over HTTPS. - OCPP 1.6 GetConfiguration now returns values of Etrel-specific keys (if they are specified in request). - Faster boot-up for chargers with WiFi module. - Disabled Gsm modem driver when Gsm modem isn't installed. - Software overcurrent protection: in case that vehicle is consuming significantly more current than charger allows, this will stop charging. Default settings: in case of 120% overload, stop charging after 1000s. In case of 130% overload, stop charging after 100s. In case of 180% overload, stop charging after 10s. By default this is disabled, but can be enabled through web UI. - Faster generation of GeneralStatus for web UI (by caching of WiFi results). - Help screen shows contact information from setting AuthorizationSettings.SupportContact so it doesn't have to be a part of translations anymore. - URL for downloading charging app and/or registering a new user is also configurable through AuthorizationSettings.Login.AppDownloadUrl so it doesn't have to be a part of translations anymore. This link is used on authorization help screens. - Enabled setting a custom NTP server (setting TimeServers). - CLIENT 43 SPECIFIC: Implemented DataTransfer messages TxEnergyLimit, TxEnergyLimitReached and ChargeComplete. - CLIENT 43 SPECIFIC: Events on connector 0 are now sent as DataTransfer if VendorMessages setting contains CLIENT 43. - Meter serial number is now being sent in BootNotification (if available). - Better error message when charger is configured as three-phase, but connected only on one phase. - When firmware is updated using web UI, charger becomes Unavailable until firmware update is complete. (This was already true for firmware updates started via OCPP.) Bug fix: - Fixed: When communicating over GSM, reported connection status after a hard reset was Connection Failed even when GSM was connected. - Fixed: If connectors controler is in the middle of firmware update while operations starts and immediately suspends OS (before update was completed), the update fails and restarts after restart. - Fixed: Charger allowed two firmware updates to be started at the same time from web UI. Charger will now ignore the second firmware update in order to allow the first one to complete. - Fixed: Saving power measurements in database so archive load diagram can be shown. - Fixed: GeneralStatus was showing that not all power cluster slaves were connected even though power cluster status showed all were online. - Fixed: Sometimes IMSI and ICCID fields of BootNotification remained empty even though GSM modem was connected to the network. - Fixed: On SMS authentication screen, the QR code was different from displayed SMS text. - Fixed: Charger's WiFi access point was published among other networks. Now its SSID is hidden. - Fixed: When AFE RegisterEvents failed, operations crashed. Now it will continue working, but charger will be in Faulted state. ### Web interface - If only one web administrator is registered, don't allow deletion, blocking or degrading the role of this user. - Enforce unique usernames for web UI users. - Web session length is now 1 day (after user logs in they will remain logged in for 1 day). - Added software overcurrent protection settings. - Optimized web UI load times through file minimization. - In Power management dashboard: added horizontal lines to denote building power and cluster power. - Showing additional information for charging sessions that were started remotely. - Disable HTTPS hosting if charger doesn't have its hosting certificate (so that administrator can still connect via HTTP and correct the matter). Bug fix: - Fixed: Saving energy price (tariff) information and deleting unsaved tariff. - Fixed: Power management energy consumption graph was empty. - Fixed: Drop down boxes with numbers were cramped (Configuration\Local users and Configuration\Charger configuration\Web interface access). - Fixed: Number of identifications (in User\Local users) never went down, even when identification was deleted. - Fixed: Power Profile was missing Connector profile data. - Fixed: In Reporting\Authorizations the users got deleted if filtered by user. - Fixed: Showing wrong power of chargers in a cluster. - Fixed: It was possible to enter same RFID card for two local users. - Fixed: When enabling WiFi a never-ending "Please wait searching" was displayed. - Fixed: When switching between WiFi networks, a never-ending "Please wait while connecting" was displayed. - Fixed: In reports, Clear filter sometimes didn't work. - Fixed: Some of the icons in the upper right corner disappeared after reloading the page in browser. - Fixed: If GSM modem is enabled, rebooting the charger via web UI sometimes caused charger get stuck with operations not running (most likely it didn't restart at all). - Fixed: Some PowerManagement settings were not obfuscated (if they included more than one version). - Fixed: Some of the filters in reports didn't work. - Fixed: Gsm connection status was always "Connection failed". - Fixed: WiFi could not conect to an open network (without passphrase). - Fixed: Restore Configuration wasn't working. ### Power Management Bug fix: - Fixed: saving power measurements in database. - Fixed: charging was limited to 15A. - Fixed: PM was cyclically pausing charging on the charger. - Fixed: PM was not respecting cluster current limit. ### Service Window Bug fix: - Fixed: rebooting charger from service window took 6 minutes. ### Drivers Versions of drivers included in this release: - Afe.dll: 1.12 - Backlight.dll: 0.13 - Buzzer.dll: 0.12 - Gsm.dll: 1.00 - Iec.dll: 0.26 - Light.dll: 0.10 - Logger.dll: 1.00 - Nfc.dll: 1.04 - Plc.dll: 0.12 - Rst.dll: 0.08 - Touch_st1633i.dll: 0.02 ConnectorsController firmware version: 1.02